How To Install Taylormade M1 Shaft Adapter
Apple released its 2022 latest macOS 12 Monterey on October 25, 2022. It is the time of this twelvemonth over again that you might need to reconfigure your macOS if you are upgrading from macOS xi Big Sur or older versions.
Or if you have a make new Mac with macOS 12 Monterey, the beneath configuration steps should assist y'all fix your local web server on the macOS platform.
On macOS 12 Monterey, Apache is congenital into the system. Yet, when you check the built-in Apache's httpd.conf, yous will notice a line says:
#PHP was deprecated in macOS eleven and removed from macOS 12
From macOS 12 Monterey, since there is no born PHP, if you lot want to set upward a MAMP (macOS, Apache, MySQL, PHP) stack, I recommend using the Homebrew version of Apache as well as PHP.
Disable macOS Built-in Apache
Since we will non be using the macOS 12 built-in version of Apache, if your built-in Apache is running, result the post-obit command to stop the Apache service.
Open up Terminal and type:
sudo apachectl finish
Homebrew Installation
The first thing you need to do is install Homebrew to your macOS 12 Monterey organization (if yous take not installed Homebrew even so).
Check if you have Homebrew install or knowing the installed Homebrew version
Open up Terminal and type brew -v
If returns something like:
Homebrew three.iii.0 Homebrew/homebrew-core (git revision 359f9f16171; last commit 2022-10-25)
This ways you take Homebrew already installed. If you don't run into the above, follow the below steps to install the Homebrew in your arrangement.
Go to https://brew.sh/
Copy the command of
/bin/bash -c "$(gyre -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
Open up Terminal and paste the to a higher place command.
Notation: if y'all don't take Command Line Tools for Xcode installed, the Homebrew installer will download and install the Command Line Tools for Xcode outset and so it will continue to complete the installation of Homebrew to your organisation.
To learn more well-nigh Homebrew, cheque out How to use Homebrew on macOS 12 Monterey
Export the Homebrew Path
When you try to event a brew command, you might get the below error.
zsh: control not found: mash
If yous are getting the in a higher place error, you have to export the path by issuing the post-obit commands.
Open the Terminal and type the beneath command and press Enter.
export PATH="/opt/homebrew/bin:$PATH"
then blazon the below command and press Enter.
repeat 'export PATH="/opt/homebrew/bin:$PATH"' >> $HOME/.zshrc
Close the Last and re-open up a new Last window.
Installing Apache via Homebrew
Once you have Homebrew installed and properly set the consign, the adjacent footstep is to install the Apache using Homebrew.
Open Terminal
Type brew install httpd
Configure the Homebrew version Apache (httpd.conf file)
Open Terminal
Type cd /opt/homebrew/etc/httpd/
Blazon sudo cp httpd.conf httpd.conf.bak and press enter (this footstep is optional if you want to continue the re-create of the original config file.)
Type sudo nano httpd.conf
Enable the Modules and Configuration
Y'all need to enable (uncomment the line) and change/update the configuration in httpd.conf file.
To enable the modules, commencement, you need to find the modules that you want to enable.
Utilise control + w to bring up the search function, and look for the below modules and brand sure to uncomment them. (remove the # in front of each line.)
LoadModule authn_core_module lib/httpd/modules/mod_authn_core.so
LoadModule authz_host_module lib/httpd/modules/mod_authz_host.and so
LoadModule userdir_module lib/httpd/modules/mod_userdir.so
LoadModule include_module lib/httpd/modules/mod_include.so
LoadModule rewrite_module lib/httpd/modules/mod_rewrite.and then
Include /opt/homebrew/etc/httpd/extra/httpd-userdir.conf
Alter the DocumentRoot
Utilize command + westward and search for DocumentRoot. Comment out (put # in front of each line of below.
DocumentRoot "/opt/homebrew/var/www" <Directory "/opt/homebrew/var/www">
And add the beneath lines
DocumentRoot "/Users/USERNAME/Sites/" <Directory "/Users/USERNAME/Sites/">
Note: USERNAME needs to exist replaced with your username (e.one thousand. developer)
Then you lot need to change the options as below:
Options Indexes FollowSymLinks Multiviews MultiviewsMatch Any
AllowOverride All
The final configuration of DocumentRoot should look similar beneath:
#DocumentRoot "/opt/homebrew/var/www" #<Directory "/opt/homebrew/var/www"> DocumentRoot "/Users/programmer/Sites/" <Directory "/Users/programmer/Sites/"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Annotation that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please encounter # http://httpd.apache.org/docs/2.4/modern/core.html#options # for more information. # Options Indexes FollowSymLinks Multiviews MultiviewsMatch Any # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # AllowOverride FileInfo AuthConfig Limit # AllowOverride All # # Controls who can become stuff from this server. # Require all granted </Directory>ed
Modify the Listening Port
By default, information technology will heed to port 8080. If y'all want to heed to port lxxx, alter the Listen 8080 to Listen fourscore.
Use Command + w and search for Listen 8080 then supervene upon with Listen 80
This is optional. You can go along using the default Listen 8080
Note: Your macOS Local Apache Server may exist agile on port 80. I would recommend to keep the HomeBrew version at port 8080.
Create Sites folder under your Username
Since nosotros defined the DocumentRoot to be /Users/USERNAME/Sites. Nosotros need to create this "Sites" folder under the user "programmer".
Open Finder and navigate to the user's binder.
Create New Folder and name it "Sites"
Install PHP via Homebrew
Open Final
Type brew install PHP
Wait for the installation to complete.
Modify the httpd.conf to enable the PHP on Apache
Open up Final
Type cd /opt/homebrew/etc/httpd/
Blazon sudo nano httpd.conf
Add the following lines.
LoadModule php_module /opt/homebrew/opt/php/lib/httpd/modules/libphp.so <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch>
Use Control + due west and search for DirectoryIndex, and so add together alphabetize.php
Create phpinfo.php file
phpinfo.php file will be used to check if the PHP is working or not.
Open Terminal
Type cd ~/Sites
Type sudo nano phpinfo.php
Once the nano application is opened, add the beneath line.
<?php phpinfo(); ?>
then press control + o to save then control + 10 to get out nano app.
Starting Apache server
In one case the configuration of Apache and PHP are completed, allow's start up the Apache server.
Open Concluding
Blazon brew services restart httpd
To check if the Apache service running or not, type brew services list
Y'all should see something like:
httpd started developer /Users/programmer/Library/LaunchAgents/homebrew.mxcl.httpd.plist
If you see the "started" status, that means the Apache server is up and running.
Go to web browser and type localhost and press enter.
You lot should come across a screen similar below:
If yous click the phpinfo.php, and if your PHP is working properly, you lot should see the PHP info page.
Install MySQL Server
Get to https://dev.mysql.com/downloads/mysql/
Select the ARM 64-bit DMG Annal and download the installer.
One time the installer is downloaded, double click and proceed as instructed.
Once the MySQL server is successfully installed, y'all should be able to meet information technology in the Organisation Preferences.
If y'all are looking for macOS eleven Large Sur version of how to setup the MAMP, please run into Setting Up Your Local Web Server on macOS Big Sur 11.0.one (2020)| MAMP Setup on mac | macOS, Apache, MySQL, PHP
Latest Posts
Source: https://tech-cookbook.com/2021/10/25/how-to-setup-mamp-macos-apache-mysql-php-on-macos-12-monterey-2021/
Posted by: erbeprisperfes.blogspot.com
0 Response to "How To Install Taylormade M1 Shaft Adapter"
Post a Comment